How To Apply MS Floor Adhesive

MS floor adhesive, also known as modified silicone floor adhesive, is a type of adhesive specifically designed for bonding floor coverings such as vinyl, carpet tiles, and laminate to various subfloors. Below are the steps for applying MS floor adhesive:

1. Preparation of the Subfloor:

• Ensure the subfloor is clean, dry, and free of any contaminants such as dust, grease, or moisture.

• Fill in any cracks or holes with suitable fillers and allow them to dry completely.

• Sand down any rough areas to create a smooth and even surface.

2. Application of the Adhesive:

• Apply the MS floor adhesive evenly and thinly over the prepared subfloor using a suitable trowel or roller.

• Ensure that the adhesive covers the entire surface evenly, with no gaps or missed spots.

• Allow the adhesive to become tacky before laying down the floor covering. The tacky stage is indicated by the adhesive's ability to stick to a dry finger when lightly touched.

3. Laying of the Floor Covering:

• Carefully position the floor covering over the adhesive-coated subfloor.

• Use a roller or roller with a soft, non-abrasive cover to press the floor covering firmly into the adhesive, ensuring there are no air bubbles or gaps.

• Roll the floor covering in all directions to ensure even adhesion.

4. Cleaning and Maintenance:

• Clean any excess adhesive from the floor covering and tools immediately after application using a damp cloth or solvent.

• Allow the floor covering to set and dry according to the manufacturer's instructions.

• Maintain the floor covering as per the manufacturer's recommendations to ensure long-lasting performance.

5. Safety Precautions:

• Always wear appropriate protective gear such as gloves and eye protection when handling MS floor adhesive.

• Ensure good ventilation during application to avoid inhaling any fumes.

• Follow all local regulations and safety guidelines when using MS floor adhesive.

By following these steps, you can ensure that your MS floor adhesive is applied correctly, leading to a strong and durable bond between the floor covering and the subfloor.