Safe and trustworthy products and services. Request a quote.
TA112 is a high-performance light-weight filler designed for low impact interior surfaces. Fast curing and ultra-easy sanding for time sensitive applications.
| Quantity: | |
|---|---|
TA112
KINGWIT
Advantages
|  |
Technical Data
Appearance | Paste |
Density | 0.45±0.05g/cm³ |
Solid content | ≥50% |
Odor | Low |
Shelf life | 18moths |
Application Temperature | -5C-40°C |
Drying Time | 24hours |
Description for use
1. All surfaces need to be clean and dry with no loose or powdery material.
2. For best results when applyingto exterior surfaces, prime surfaces first.
3. Press filler firmly into place with a filling knife.
4. For deeper cavities apply in layers up to 8mm thick, allowing each layer to dry before reapplying next layer.
5. Fast dry - nail holes in 15 minutes. Large holes 3 hours. Allow to dry before sanding and painting.
6. Drying time will be extended in humid or cold conditions. Do not apply below 5℃.
7. Can be over painted with both acrylic and turpentine based paint systems.
8. Clean up in water
Typical application
Wood Cracks
Wook Damages
Wood Gouges
Wood Holes
Storage
Store in the original sealed packaging at temperatures of between 0℃ and 30℃, this product is sensitive to frost and must be kept in tightly closed packaging.The shelf life is about 18 months when stored in a cool and dry place.
Note
Keep out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
Advantages
| |
Technical Data
Appearance | Paste |
Density | 0.45±0.05g/cm³ |
Solid content | ≥50% |
Odor | Low |
Shelf life | 18moths |
Application Temperature | -5C-40°C |
Drying Time | 24hours |
Description for use
1. All surfaces need to be clean and dry with no loose or powdery material.
2. For best results when applyingto exterior surfaces, prime surfaces first.
3. Press filler firmly into place with a filling knife.
4. For deeper cavities apply in layers up to 8mm thick, allowing each layer to dry before reapplying next layer.
5. Fast dry - nail holes in 15 minutes. Large holes 3 hours. Allow to dry before sanding and painting.
6. Drying time will be extended in humid or cold conditions. Do not apply below 5℃.
7. Can be over painted with both acrylic and turpentine based paint systems.
8. Clean up in water
Typical application
Wood Cracks
Wook Damages
Wood Gouges
Wood Holes
Storage
Store in the original sealed packaging at temperatures of between 0℃ and 30℃, this product is sensitive to frost and must be kept in tightly closed packaging.The shelf life is about 18 months when stored in a cool and dry place.
Note
Keep out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
