Safe and trustworthy products and services. Request a quote.
| Quantity: | |
|---|---|
TP703
KINGWIT
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Water clean-up of uncured sealant. ● Good gap filling capability. ● Can be painted over using water based paints. ● Excellent adhesion to Cornice materials. ● Excellent adhesion. ● Fast cure，Low odor. ● Easy to use. ● Non-toxic. |  |
Appearance | Paste |
Specific gravity | 1.38 g/cm³ |
Sagging | 0 |
Skinning time | 42 mins |
Curing rate | 3mm/24h |
Tensile Strength | 4.18Mpa |
Hardness, Shore A | 55 |
Elongation at break | 665% |
Solid Content | 99% |
Tear Strength | 18.9N/mm |
Service Temperature Range | -40℃- +80℃ |
Application in short time(at most 8 hours) | 120℃ |
Correction factor | 10% of the width of the joints. |
Packing | Color | Quantity/carton |
600ml | White, Black, Grey etc. | 20 sausages |
310ml | White, Black, Grey etc. | 25 aluminum cartridge |
The auto body sealant can be applied for:
● Sealing for weld joint of autos and machines.
● Sealing for joints of containers and shelters.
● Sealing and water proofing for joints of van vehicles.
● Sealing for bus air-condition during installing.
● As an adhesive for metal plate of the autos.
The car body sealant can be stored for 12 months stored at dry below 25℃ unopened in original containers
Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Water clean-up of uncured sealant. ● Good gap filling capability. ● Can be painted over using water based paints. ● Excellent adhesion to Cornice materials. ● Excellent adhesion. ● Fast cure，Low odor. ● Easy to use. ● Non-toxic. | |
Appearance | Paste |
Specific gravity | 1.38 g/cm³ |
Sagging | 0 |
Skinning time | 42 mins |
Curing rate | 3mm/24h |
Tensile Strength | 4.18Mpa |
Hardness, Shore A | 55 |
Elongation at break | 665% |
Solid Content | 99% |
Tear Strength | 18.9N/mm |
Service Temperature Range | -40℃- +80℃ |
Application in short time(at most 8 hours) | 120℃ |
Correction factor | 10% of the width of the joints. |
Packing | Color | Quantity/carton |
600ml | White, Black, Grey etc. | 20 sausages |
310ml | White, Black, Grey etc. | 25 aluminum cartridge |
The auto body sealant can be applied for:
● Sealing for weld joint of autos and machines.
● Sealing for joints of containers and shelters.
● Sealing and water proofing for joints of van vehicles.
● Sealing for bus air-condition during installing.
● As an adhesive for metal plate of the autos.
The car body sealant can be stored for 12 months stored at dry below 25℃ unopened in original containers
Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
