Safe and trustworthy products and services. Request a quote.
| Quantity: | |
|---|---|
TP702
KINGWIT
● One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Can be painted over using water based paints. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Excellent adhesion to Cornice materials. ● Water clean-up of uncured sealant. ● Good gap filling capability. ● Excellent adhesion ● Fast cure. ● Low odor. ● Easy to use. ● Fast curing. ● Non-toxic. |  |
Appearance | Paste |
Tack free time | 20-60min |
Curing speed | 3-5mm/24h |
Volatile content | ≤3% |
Extrudability | ≥80m/min |
Hardness | 50±5 Shore A |
Density | 1.25±0.05 g/cm³ |
Tensile Strength | ≥5.0Mpa |
Elongation at break | ≥400% |
Sagging | 0mm |
Operating temperature | ﹢5℃-35℃ |
Packing | Color | Quantity/carton |
600ml | Black | 20 sausages |
310ml | Black | 25 cartridges |
Application Scenarios
The auto windshield polyurethane sealant can be:
● Suitable for the installation of automotive windshields.
● Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
Storage & Note
The auto windshield polyurethane sealant can be stored for 9 months at dry below 25℃ unopened in original containers.
● After cleaning the surface, wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5℃ to 38 ℃ environment, not recommended to apply.
● Before the surface is dry, it can be trimmed with tools.
● After the benchmark, it can be sprayed on the surface. Before spraying, please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
● One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Can be painted over using water based paints. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Excellent adhesion to Cornice materials. ● Water clean-up of uncured sealant. ● Good gap filling capability. ● Excellent adhesion ● Fast cure. ● Low odor. ● Easy to use. ● Fast curing. ● Non-toxic. | |
Appearance | Paste |
Tack free time | 20-60min |
Curing speed | 3-5mm/24h |
Volatile content | ≤3% |
Extrudability | ≥80m/min |
Hardness | 50±5 Shore A |
Density | 1.25±0.05 g/cm³ |
Tensile Strength | ≥5.0Mpa |
Elongation at break | ≥400% |
Sagging | 0mm |
Operating temperature | ﹢5℃-35℃ |
Packing | Color | Quantity/carton |
600ml | Black | 20 sausages |
310ml | Black | 25 cartridges |
Application Scenarios
The auto windshield polyurethane sealant can be:
● Suitable for the installation of automotive windshields.
● Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
Storage & Note
The auto windshield polyurethane sealant can be stored for 9 months at dry below 25℃ unopened in original containers.
● After cleaning the surface, wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5℃ to 38 ℃ environment, not recommended to apply.
● Before the surface is dry, it can be trimmed with tools.
● After the benchmark, it can be sprayed on the surface. Before spraying, please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
