Safe and trustworthy products and services. Request a quote.
| Quantity: | |
|---|---|
TP610
KINGWIT
Engineered for critical sealing tasks, the TP610 series is a fast-curing waterproof polyurethane sealant that delivers lasting elasticity. And the product advantages are as below:
● Excellent adhesion on all cement-based materials, brick, glazed brick, metal and wood.
● Neutral, no pollution and curing under normal temperature.
● Nontoxic and anti-mould.
● Excellent durability.
● High abrasion resistance and tear strength.
● Good weathering and water resistance.
● Good slump resistance, non-sag.
● Apply directly on site, no need mix.
● Can be painted, good compatibility with paints.
● No corrosion.
Product Name | TP610-25LM/20HM Household/ Project Waterproof Polyurethane Sealant | |||
Class | 25LM | 20HM | ||
Extrudability (ml/min) | ≥80 | |||
Density | 1.3~1.4KG/L | |||
Tack free time | 45-120min, depending on weather | |||
Curing time | ≥2mm/24h | |||
Hardness Shore A | 27 | 58 | ||
Tensile strength | 2.3 | 3.0 | ||
Modulus(100% Elongation) | 23℃ | ≤0.4Mpa | >0.4Mpa | |
-20℃ | ≤0.6Mpa | >0.6Mpa | ||
Elastic Recovery | ≥70% | |||
Elongation at break | 950% | 650% | ||
Anti-mould | 0-1 class | |||
Application Temperature | 5-35℃ | |||
Service Temperature | -40-90℃(minimum 50℃ in hot water) | |||
Tensile Properties at maintained extension | No breaking | |||
Tensile properties at maintained extension(after water immersion) | No breaking | |||
Tensile properties (cold extension-hot compression) | No breaking | |||
The waterproof polyurethane sealant is typically applied for:
● Sanitary facility.
● Roof and underground construction.
● Bridge, tunnel, culvert, hydraulic engineering.
● Joints in the roof and gutter.
● Joints in water pipes.
● Container, tank and silos.
● Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
● The waterproof polyurethane can be stored for 9 months at dry below 25℃ unopened in original containers.
Engineered for critical sealing tasks, the TP610 series is a fast-curing waterproof polyurethane sealant that delivers lasting elasticity. And the product advantages are as below:
● Excellent adhesion on all cement-based materials, brick, glazed brick, metal and wood.
● Neutral, no pollution and curing under normal temperature.
● Nontoxic and anti-mould.
● Excellent durability.
● High abrasion resistance and tear strength.
● Good weathering and water resistance.
● Good slump resistance, non-sag.
● Apply directly on site, no need mix.
● Can be painted, good compatibility with paints.
● No corrosion.
Product Name | TP610-25LM/20HM Household/ Project Waterproof Polyurethane Sealant | |||
Class | 25LM | 20HM | ||
Extrudability (ml/min) | ≥80 | |||
Density | 1.3~1.4KG/L | |||
Tack free time | 45-120min, depending on weather | |||
Curing time | ≥2mm/24h | |||
Hardness Shore A | 27 | 58 | ||
Tensile strength | 2.3 | 3.0 | ||
Modulus(100% Elongation) | 23℃ | ≤0.4Mpa | >0.4Mpa | |
-20℃ | ≤0.6Mpa | >0.6Mpa | ||
Elastic Recovery | ≥70% | |||
Elongation at break | 950% | 650% | ||
Anti-mould | 0-1 class | |||
Application Temperature | 5-35℃ | |||
Service Temperature | -40-90℃(minimum 50℃ in hot water) | |||
Tensile Properties at maintained extension | No breaking | |||
Tensile properties at maintained extension(after water immersion) | No breaking | |||
Tensile properties (cold extension-hot compression) | No breaking | |||
The waterproof polyurethane sealant is typically applied for:
● Sanitary facility.
● Roof and underground construction.
● Bridge, tunnel, culvert, hydraulic engineering.
● Joints in the roof and gutter.
● Joints in water pipes.
● Container, tank and silos.
● Keep contents out of reach of children. In case of contact with eyes, please rinse eyes with plenty of water and seek medical advice as soon as possible
● The waterproof polyurethane can be stored for 9 months at dry below 25℃ unopened in original containers.
