Safe and trustworthy products and services. Request a quote.
| Quantity: | |
|---|---|
TP703
KINGWIT
Products Advantages
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Excellent adhesion. ● Fast cure，Low odor. ● Easy to use. ● Water clean-up of uncured sealant. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Can be painted over using water based paints. ● Non-toxic. ● Excellent adhesion to Cornice materials. ● Good gap filling capability. |  |
Products Parameters
Product Name | PU sealant |
Sagging | <3mm |
Specific gravity | 1.3KG/L |
Skinning time | Wet solidification |
Surface dry time | <60mins |
Curing rate | 3mm/24h |
Hardness, Shore A | 40 |
| Tensile Strength | 2.0Mpa |
| Elongation at break | >400% |
| Tear Strength | 11N/mm |
| Service Temperature Range | -40℃±80℃ |
| Application in short time(at most 8 hours) | 120℃ |
| Correction factor | 10% of the width of the joints. |
Application Scenarios
● Seal for weld joint of autos and machines.
● Seal for joints of containers and shelters.
● Seal and water proofing for joints of van vehicles.
● Seal for bus air-condition during installing.
● As an adhesive for metal plate of the autos.
Products Advantages
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ● Excellent adhesion. ● Fast cure，Low odor. ● Easy to use. ● Water clean-up of uncured sealant. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Can be painted over using water based paints. ● Non-toxic. ● Excellent adhesion to Cornice materials. ● Good gap filling capability. | |
Products Parameters
Product Name | PU sealant |
Sagging | <3mm |
Specific gravity | 1.3KG/L |
Skinning time | Wet solidification |
Surface dry time | <60mins |
Curing rate | 3mm/24h |
Hardness, Shore A | 40 |
| Tensile Strength | 2.0Mpa |
| Elongation at break | >400% |
| Tear Strength | 11N/mm |
| Service Temperature Range | -40℃±80℃ |
| Application in short time(at most 8 hours) | 120℃ |
| Correction factor | 10% of the width of the joints. |
Application Scenarios
● Seal for weld joint of autos and machines.
● Seal for joints of containers and shelters.
● Seal and water proofing for joints of van vehicles.
● Seal for bus air-condition during installing.
● As an adhesive for metal plate of the autos.
