Safe and trustworthy products and services. Request a quote.
| Quantity: | |
|---|---|
TP702
KINGWIT
Products Advantages
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ●Excellent adhesion ● Fast cure. ● Low odor ● Easy to use. ● Fast curing. ● Water clean-up of uncured sealant. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Can be painted over using water based paints. ● Non-toxic. ● Excellent adhesion to Cornice materials. ● Good gap filling capability. |  |
Products Parameters
Product Name | Polyurethane Sealant for windshield |
Density | 1.4g/cm³ |
Tack free time | 30-90min |
Curing speed | 3mm/24h |
Solid content | ≥95% |
Extrudability | ≥80g/min |
Hardness | 60 Shore A |
| Density | 1.3 g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40℃ - 80℃ |
Application Scenarios
● Suitable for the installation of automotive windshields.
● Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
● After cleaning the surface, wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5℃ to 38 ℃ environment, not recommended to apply.
● Before the surface is dry, it can be trimmed with tools.
● After the benchmark, it can be sprayed on the surface. Before spraying, please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
Products Advantages
●One component, moisture-curing, non-sag, fast cure polyurethane sealant for windshield. ●Excellent adhesion ● Fast cure. ● Low odor ● Easy to use. ● Fast curing. ● Water clean-up of uncured sealant. ● Can be sanded back once fully cured if required to give smooth surface finish. ● Can be painted over using water based paints. ● Non-toxic. ● Excellent adhesion to Cornice materials. ● Good gap filling capability. | |
Products Parameters
Product Name | Polyurethane Sealant for windshield |
Density | 1.4g/cm³ |
Tack free time | 30-90min |
Curing speed | 3mm/24h |
Solid content | ≥95% |
Extrudability | ≥80g/min |
Hardness | 60 Shore A |
| Density | 1.3 g/cm³ |
| Tensile Strength | ≥5.0Mpa |
| Elongation at break | ≥400% |
| Tear Strength | ≥12Mpa |
| Shear Strength | ≥4.5N/mm |
| Service Temperature | -40℃ - 80℃ |
Application Scenarios
● Suitable for the installation of automotive windshields.
● Suitable materials: glass, metal, metal primer and lacquer, ceramic materials and plastics.
● After cleaning the surface, wipe it dry and continue to glue evenly.
● Please use it promptly after opening.
● -5℃ to 38 ℃ environment, not recommended to apply.
● Before the surface is dry, it can be trimmed with tools.
● After the benchmark, it can be sprayed on the surface. Before spraying, please carry out compatibility test; the paint needs to be used after it is fully cured.
● Wash hands and exposed skin immediately after application.
